Municipal wastewater treatment plants face unstable inlet water quality, fluctuating organic loads, strict discharge standards and high sludge disposal costs every day. Polyacrylamide (PAM) is the core flocculant widely used in sewage clarification, sludge thickening and sludge dewatering processes. TronkiChem supplies customized cationic, anionic and nonionic polyacrylamide grades to match different wastewater conditions and on-site working conditions for sewage plants.
1. Wastewater & Sludge Status of Wastewater Treatment Plants
Most municipal sewage plants mainly treat domestic sewage mixed with a small amount of dispersed industrial wastewater. After biochemical treatment, the secondary sedimentation tank contains a large amount of activated biological sludge.
- Sludge characteristics: Fine colloidal particles, negatively charged, high bound water content, difficult to separate water and sludge; sludge concentration usually 0.8%–1.2%
- Common pain points: Slow floc formation, small flocs, turbid filtrate, high moisture content of sludge cake, large sludge volume, high transportation and landfill cost, unstable SS in outlet water, excessive dosing cost
- Seasonal interference: Rainy season inflow dilution, low temperature in winter slows flocculation speed, organic load surges in peak period
Without proper PAM conditioning, sludge dewatering equipment cannot run stably, and the final effluent may fail to meet local discharge requirements.
2. Typical Working Conditions & PAM Application Scenarios
We classify the application scenarios according to the treatment process and dewatering machine type of the wastewater plant:
2.1 Sludge Dewatering (Core Scenario, Cationic PAM)
This is the most common usage for sewage plants.
- Equipment matched: Belt filter press, screw press, centrifuge, plate-and-frame filter press
- Recommended product: Cationic polyacrylamide (CPAM), adjustable charge density 30%–60%, molecular weight 8–12 million
- Working principle: Neutralize negative charge on biological sludge surface, aggregate fine sludge into dense, large flocs, release interstitial water and bound water
- Effect target: Reduce sludge cake moisture, reduce sludge volume, clear filtrate, lower polymer consumption
2.2 Secondary Sedimentation & Advanced Clarification (Anionic PAM)
Used for secondary sedimentation tank, final sedimentation tank or advanced treatment after biochemical process, often used together with PAC.
- Recommended product: Anionic polyacrylamide (APAM)
- Function: Aggregate suspended solids, reduce outlet SS, improve settling speed, assist standard discharge
2.3 Sludge Thickening Tank
Add PAM before thickening to improve settling efficiency, increase sludge concentration and reduce the load of subsequent dewatering units.
3. TronkiChem Matching Solution
- Sample test first: We test your sludge sample, confirm sludge property, pH, organic content, and select the optimal ionic degree and molecular weight PAM
- Dosing guide: Dissolution concentration 0.1%–0.2%, slow stirring, avoid high shear to prevent floc breaking; provide dosing range according to dry solids
- On-site adjustment: Adjust dosage and model for rainy season, low temperature and load fluctuation
- Stable supply: Powder & emulsion PAM available, suitable for continuous operation of sewage plant
4. Benefits You Can Get
✅ Lower sludge cake moisture, reduce sludge transportation and disposal expense ✅ Clear filtrate, less SS return to the biochemical system ✅ Stable floc, reduce machine blocking and downtime ✅ Lower chemical consumption, cut overall wastewater treatment operating cost ✅ Help the plant keep effluent within discharge compliance
If you send us your wastewater index, sludge type and dewatering equipment, TronkiChem engineers can provide a targeted polyacrylamide selection scheme.
